Two-Sided Copy - Canon iR1510 Reference Manual

n n n n Two-Sided Copy
Using the stack bypass, you can copy 2 documents on opposite sides of a single sheet.
n n n n When Loading Documents in the ADF (only for the iR1530/iR1570F models)
1
Load the first page of the document face down in the ADF, then press Start
to begin copying.
• Make sure to open the stack bypass and pull out the paper tray. (R p. 2-5)
2
Load the next page of the document in the ADF.
Portrait orientation documents:
Load the page so that the top edge is opposite to the top edge of the
previous page.
Landscape orientation documents:
Load the page so that the orientation is the same as the previous page.
3
Turn over the copy you made in step 1 to make sure that the inner and front
side of it will remain in the same position as shown below, then insert it into
the stack bypass.
• If the copied sheet is curled, uncurl it before inserting it into the stack bypass. Failure to
do so will cause paper creases and paper jams.
4
Press Paper Select to select the stack bypass. (→ pp. 4-2, 4-3)
5
Press Start to copy the next page to finish making your two-sided copy.
4-12
Copy of the first page of the
document
Turn over
the copy
Inner side
Front side
Insert