Basic Copying Functions; Making Multiple Copies; Selecting The Paper Feeding Location (Paper Drawer Or Stack Bypass) - Canon iR1510 Reference Manual

n n n n After scanning documents
1
Press Stop/Reset.
2
Press O (s).
• If you do not want to cancel the copy job, press P (r) for
• If you press Stop/Reset while the document is being scanned by the ADF,
copying is suspended and the document will be caught in the ADF. In this case,
press OK and the document will be come out.

Basic Copying Functions

n n n n Making Multiple Copies
You can make multiple copies.
1
Use the numeric keys to enter the number of copies you want.
• The LCD displays the number of copies you entered.
• You can make up to 99 copies.
• You can reserve the next copy job while the machine is outputting copies.
(→ p. 4-10)
• The LCD keeps on displaying the specified number of copies until copying
finishes. When the auto clear function activates, it returns to the standby screen
(number of copies: 1, factory default settings).
n n n n Selecting the Paper Feeding Location (Paper Drawer or Stack Bypass)
When making copies on paper which cannot be loaded in the paper drawer, such as thick paper, transparencies, labels, envelopes,
tracing paper, etc., you can use the stack bypass.
• The settings changed in the Additional Functions are not returned automatically to the settings you set previously. Change to the
previous settings again if necessary.
1
Press Paper Select to select the paper feeding location (paper drawer or
stack bypass).
A: If you select a paper type other than
. (→ p. 7-2)
P A P E R T Y P E
#: If you set
C O P Y P O W E R L E V E L
• If you do not load paper in the stack bypass before you press Paper Select, the
message
S U P P L Y R E C . P A P E R S . B .
Stop/Reset. (
• When making copies on A4-size paper after having continuously copied on paper
smaller than A4-size paper, the copies may be dirty. To prevent copies from being
dirty, wait about one minute before making copies.
• When making copies of a small size or thick paper, etc., the copy speed may be
slightly slower than usual.
• If you intend to make a copy and print with a thermal transfer printer on one sheet
of paper, make the copy first. Failure to do so may make copies dirty or cause a
paper jam.
• When copying onto transparencies, remove each transparency from the output tray
as it is output.
4-2
P L A I N P A P E R
to or
H I G H
: appears until you load paper or press
→
p. 2-5)
.
N O
in
B Y P A S S
. (→ p. 7-2)
L O W
C A N C E L C O P Y I N G ?
Ex:
< Y E S
1 0 0 % A 4
Ex: T E X T
A
1 0 0 % S . B . # F R E E
Ex:
T E X T
N O >