Canon iR1510 Reference Manual page 41

4
n n n n When Placing a Document on the Platen Glass
1
Place the first page of the document face down on the platen glass, then press
Start to begin copying.
• Make sure to open the stack bypass and pull out the paper tray. (R p. 2-5)
2
Place the next page of the document on the platen glass.
Portrait orientation documents:
Place the page so that the top edge is opposite to the top edge of the
previous page.
Landscape orientation documents:
Place the page so that the orientation is the same as the previous page.
3
Turn over the copy you made in step 1 to make sure that the inner and front
side of it will remain in the same position as shown below, then insert it into
the stack bypass.
• If the copied sheet is curled, uncurl it before inserting it into the stack bypass. Failure to
do so will cause paper creases and paper jams.
4
Press Paper Select to select the stack bypass. (→ pp. 4-2, 4-3)
5
Press Start to copy the next page to finish making your two-sided copy.
Copy of the first page of the document
Turn over
the copy
Inner side
Front side
4
Insert
4-13