Connecting With A Vcr - Sony VPL-W400Q Operating Instructions Manual

Connecting with a VCR

to a wall outlet to AC IN
AC power cord
Front
(supplied)
S-Video cable (not supplied)
to S VIDEO OUT
VCR
14
(EN)
This section describes how to connect the projector with a VCR and
external active speakers. For details on how to connect other equipment,
see page 32.
Also refer to the instruction manuals of the equipment to be connected.
When making connections, be sure to:
• turn off all equipment before making any connections.
• use the proper cables for each connection.
• insert the plugs of the cables properly; plugs that are not fully inserted
often generate noise. When pulling out a cable, be sure to pull it out from
the plug, not the cable itself.
VIDEO IN VIDEO IN AUDIO IN
L (MONO)
S VIDEO VIDEO R R/R-Y/P
Audio cable
(not supplied)
to
VIDEO
to AUDIO OUT
OUT
Rear
AUDIO OUT
L
R
CONTROL S
IN
PLUG
IN POWER
OUT
TRIG
INPUT-A AUDIO IN
L
G/Y B/B-Y/P C.SYNC
R B
Video cable (not supplied) 1)
1) When using the video cable with
the phono plug, attach the supplied
BNC-phono adaptor.
Phono plug
Active speakers
R
Adaptor (supplied)