Connecting With A Vcr - Sony VPL-CX71 Operating Instructions Manual

appear properly. Set your computer to output
the signal to only the external monitor.
For details, refer to the computer's
operating instructions supplied with your
computer.
Note
To connect a Macintosh computer equipped
with video output connector of a type having
two rows of pins, use a commercially available
plug adaptor.
On the USB function
When connecting the projector to a
computer by using the USB cable for the
first time, the computer recognizes the
hu
man interface device (wireless mouse
function) automatically.
Recommended operating
environment
When you use the USB function, connect the
USB cable as illustrated above. The USB
function can be used on a computer loaded
with Windows 98, Windows 98 SE,
Windows ME, Windows 2000 or Windows
XP preinstall models.
Notes
• Your computer may not start correctly
when connected to the projector via the
USB cable. In this case, disconnect the
USB cable, restart the computer, then
connect the computer to the projector
using the USB cable.
• This projector is not guaranteed for
suspend, standby mode. When you use the
projector in suspend, standby mode,
disconnect the projector from the USB
port on the computer.
• Operations are not guaranteed for all the
recommended computer environments.
• When you connect a USB capable
Macintosh computer using the USB cable
to the projector, wireless mouse functions
become available.

Connecting with a VCR

This section describes how to connect the
projector to a VCR.
For more information, refer to the
instruction manuals of the equipment you
are connecting.
To connect to a video or S video
output connector
Left side
USB
to audio
output
(L)
1 Video cable (not supplied) or S-Video cable
(not supplied)
2 Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
INPUT A
AUDIO S VIDEO VIDEO
2 1
to audio
output
to video
(R)
output
to S
video
output
VCR
Connecting the Projector
17