Sound Settings - Harman KARDON CITATION MULTIBEAM 1100 Owner's Manual

/

SOUND SETTINGS

NOTE:
• For bass/treble adjustment, see
adjustment"
Smart Surround
With smart surround enabled by default, you can enjoy TV
programs with rich sound effects. For TV programs such as
news and weather forecasts, you can reduce sound effects by
disabling smart surround and switching to the standard mode.
• On the touch screen, swipe to the Settings page, then
tap Audio -> Smart Surround to enable or disable Smart
Surround.
Æ When Smart Surround is enabled, EQ settings and
MultiBeam surround sound are applied on the TV input.
Æ When Smart Surround is disabled, the standard EQ is
applied.
NOTES:
• When there are no Citation Surround speakers connected to the
soundbar, you can also press SURROUND on the remote control
to enable or disable Smart Surround.
• Next time you switch on the soundbar, Smart Surround is enabled
again automatically.
Audio Sync
With the audio sync function, you can synchronize audio and
video to make sure that no delay is heard from your video
content.
1) On the touchscreen, swipe to the Settings page, then tap
Speaker Setup -> Audio Sync.
2) Swipe up or down to select the audio delay that matches
with video.
"Bass adjustment" and "Treble
48