Harman KARDON CITATION MULTIBEAM 1100 Owner's Manual page 15

1) Connect the soundbar with the HDMI IN (eARC) connector
on your TV by using the supplied HDMI cable.
• On your TV, check that HDMI-CEC and HDMI eARC
have been enabled. Refer to the owner's manual of your
TV for more information.
2) Use an HDMI cable (eARC compatible, V2.0 or later)
to connect your TV with your digital device, such as a
streaming device, set-top box, DVD/Blu-ray player or game
console.
• On your digital device, check that HDMI-CEC has been
enabled. Refer to the owner's manual of your digital
device for more information.
• On your TV and digital device, select "Bitstream" or
"Raw data" in the audio output settings for the best
Dolby Atmos experience.
3) To play audio from the digital device connected to your TV,
switch on the soundbar (see
wakeup") and select the TV source.
"Power-on/Auto standby/Auto
15