Harman KARDON CITATION MULTIBEAM 1100 Owner's Manual page 17

1) Connect the soundbar with the HDMI IN (ARC) connector on
your TV by using the supplied HDMI cable.
• On your TV, check that HDMI-CEC and HDMI ARC have
been enabled. Refer to the owner's manual of your TV
for more information.
2) Use an HDMI cable (V2.0 or later) to connect the soundbar
with your digital device, such as a set-top box, DVD/Blu-ray
player or game console.
• On your digital device, check that HDMI-CEC has been
enabled. Refer to the owner's manual of your digital
device for more information.
• On your digital device, select "Bitstream" or "Raw data"
in the audio output settings for the best Dolby Atmos
experience.
3) To play audio from the digital device connected to the
soundbar, switch on the soundbar (see
standby/Auto wakeup") and select the HDMI source.
NOTE:
• If your TV does not support HDMI eARC, make sure that you
connect your digital device through the HDMI IN connector
on the soundbar instead of your TV. Otherwise, the Dolby
Atmos information cannot pass through the HDMI (ARC / eARC)
connectors to the soundbar.
"Power-on/Auto
17