Setup - Harman KARDON CITATION MULTIBEAM 1100 Owner's Manual

/

SETUP

Power-on/Auto standby/Auto wakeup
1) Plug one end of the AC power cable into the
connector on the back of the soundbar.
2) Plug the other end of the power cable into a live AC (mains)
outlet. The soundbar will automatically power on and the
touch screen will turn on.
3) Alternatively, press
switch to standby.
3
4) Follow on-screen instructions to complete first-time setup.
NOTES:
• Use the provided power cable only.
• Before connecting the power cable, make sure all other
connections have been completed.
• When you disconnect the power cable, always pull the plug, never
the cable.
• Do not connect this product or other components to an AC outlet
until all connections between components are complete.
on the remote control to power on or
1
2
29