Harman KARDON CITATION MULTIBEAM 1100 Owner's Manual page 20

Connect a Bluetooth device
1) Switch on the soundbar (see
wakeup").
2) To select Bluetooth source, tap on the touch screen or
press on the remote control.
Æ The 2 LED flashes blue quickly.
nd
3) On your Bluetooth device, enable Bluetooth and search for
"HK Citation MultiBeam 1100_XXXX" within three minutes.
Æ Successful connection: The 2
you can hear a confirmation tone.
To reconnect the last paired device
Your Bluetooth device is retained as a paired device when
the soundbar goes to standby mode. Next time you switch to
the Bluetooth source, the soundbar reconnects the last paired
device automatically.
To connect to another Bluetooth device
3
S
1) In the Bluetooth source, hold on the touch screen or
remote control until the 2nd LED flashes blue quickly.
Æ The previously paired device is cleared from the
soundbar.
Æ The soundbar enters the Bluetooth pairing mode.
"Power-on/Auto standby/Auto
LED turns solid blue and
nd
20