Graco PR70 Manual page 67

Off-Board Stainless Steel Feed Systems
Figure 91: AGITATOR MOTOR ASSEMBLY (P/N 255386)
1 01/0583/98 NUT,AGITATOR,1.75-16,.875 SHAFT
2 01/1487/01 GASKET,MTG,AGIT HOUSING,ASME,BUNA
3 02/1480/50 AGITATOR ASSY,ASME,480IN-LB,58RPM
4 81/1480-2/25 GEARMOTOR,58RPM,484IN-LBS,0.50HP,230/3/6
5 84/1480/11 COUPLING,ALIGNMENT,2.11"OD,DISK,HYTREL
6 84/1481/11 COUPLING,ALIGNMENT,2.11"OD,HUB,3/4ID,MS
• THE LIFT RINGS ON THE MOTOR ASSEMBLY ARE FOR LIFTING THE
LID ASSEMBLY OFF OF THE TANK ONLY
• DO NOT ATTEMPT TO USE THEM TO LIFT THE WHOLE TANK
• DO NOT ATTEMPT TO USE THEM TO LIFT THE WHOLE MACHINE
ASSEMBLY
312394B
7 96/0042/99
8 96/0184/99
9 96/0311/99
10 96/0550/99
11 02/1482-RV3/25
CAUTION
SCREW,HHC,1/4-20X1.00,MS
SCREW,SHC,1/4-28X1.00,MS,E@
WASHER,LOCK,SPLIT,1/4,HC,E@
NUT,EYE,1/4-20,MS
CONTROL ASSY,ELEC
AGIT,REMOTE,230VAC
67 of 71