Travis Industries 616 Mod-Fyre GSR2 Owner's Manual page 57

Optional Equipment (for qualified installers only)
2. Spread an even layer of crushed glass over the media tray and burner. The glass must be only (1) layer
thick on the burners but can be (2) layers thick on the media tray.
3. Make sure glass does not drop down into the pilot area below the cover and that the opening
indicated below remains open.
4. The firebox should look like the picture below when the glass installation is complete.
© Travis Industries
No glass in
this area.
1/10/2022 - 1559
57
616 MF GSR2