Wireless Advanced - TP-Link TL-WA901ND User Manual

Chapter 4
Done!
4. 4. 4.
The configuration for each operation mode is almost the same, we take Access Point
mode for example here.
1. Visit http://tplinkap.net, and log in using
2. Go to
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
Downloaded from ManualsNet.com
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select
4 ) Click
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.

Wireless Advanced

Wireless > Wireless Advanced.
search engine
Enabled in the Status drop-down list.
Save and click Back.
admin (all lowercase) for both username and password.
Configure the Access Point
44