Ping Watch Dog - TP-Link TL-WA901ND User Manual

Chapter 4
Note:
Only one user can use this tool at one time. Options "Number of Pings", "Ping Size" and "Ping Timeout" are used for the
Ping function. Option "Tracert Hops" is used for the Tracert function.
4. 5. 3.
The Ping Watch Dog is dedicated for continuous monitoring of the particular connection
to remote host using the Ping tool. It makes the access point continuously ping a user
defined IP address (it can be the Internet gateway for example). If it is unable to ping
under the user defined constraints, the access point will automatically reboot.
1. Visit http://tplinkap.net, and log in using
2. Go to
• Enable
• IP Address
sending ping packets.
• Interval
• Delay
restarted.
• Fail Count
this value is overrun, the access point will restart automatically.
Downloaded from ManualsNet.com

Ping Watch Dog

System Tools > Ping Watch
- Turn on/off Ping Watch Dog.
- The IP address of the target host where the Ping Watch Dog Utility is
- Time interval between two ping packets which are sent out continuously.
- Time delay before first ping packet is sent out when the access point is
- Upper limit of the ping packets the access point can drop continuously. If
search engine
admin (all lowercase) for both username and password.
Dog. Configure the settings and click Save.
Configure the Access Point
50