Mitsubishi FR-E520-0.1KN Instruction Manual page 100

Pr.14=0
For constant-torque loads
(e.g. conveyor, cart)
100%
Output
voltage
Base frequency
Output frequency (Hz)
Pr.14=2
For lift
Boost for forward rotation...Pr. 0 (Pr.46) setting
Boost for reverse rotation...0%
100%
Forward
rotation
Output
voltage
Reverse
Pr.0 rotation
Pr.46
Base frequency
Output frequency (Hz)
Note: 1. This parameter setting is ignored when the general-purpose magnetic flux
vector control mode has been selected.
2. Pr. 46 "second torque boost" is made valid when the RT signal turns on.
The RT signal acts as the second function selection signal and makes the
other second functions valid.
Refer to page 130 for Pr. 180 to Pr. 183 (input terminal (remote output)
function selection).
Pr. 18 # # # # Refer to Pr. 1, Pr. 2.
Pr. 19 # # # # Refer to Pr. 3.
Pr. 20, Pr. 21 # # Refer to Pr. 7, Pr. 8. # #
Pr.14=1
For variable-torque loads
(Fan, pump)
100%
Output
voltage
Base frequency
Output frequency (Hz)
Pr.14=3
For lift
Boost for forward rotation...0%
Boost for reverse rotation...Pr. 0 (Pr.46) setting
100%
Reverse
rotation
Output
voltage
Forward
Pr.0 rotation
Pr.46
Base frequency
Output frequency (Hz)
85
PARAMETERS
4