Connecting The Telephone Line Cord - Sharp UX-P100 Operation Manual

Connections

Connecting the telephone line cord

Insert one end of the line cord into the jack on the back of the machine
marked TEL. LINE. Insert the other end into a standard (RJ11C) single-line
wall telephone jack.
Dial mode:
The fax machine is set for tone dialing. If you are on a pulse dial line, you must
set the fax machine for pulse dialing. Press the keys on the operation panel as
follows:
1
FUNCTION
Press
2
Press
3
Press
4
Select the dial mode:
TONE:
1
5 STOP
Press
10
once and
once and twice.
once.
PULSE:
2
to exit.
twice.
Display:
OPTION SETTING
DIAL MODE
1=TONE, 2=PULSE
The display briefly shows
your selection, then:
DISTINCTIVE