Reception Ratio - Sharp UX-P100 Operation Manual

Optional Reception Settings
4
Press
1
to turn it off.
2
STOP
5
Press

Reception Ratio

The fax has been set at the factory to automatically reduce the size of
received documents to fit the size of the printing paper. This ensures that data
on the edges of the document are not cut off. If desired, you can turn this
function off and have received documents printed at full size.
♦
If a document is too long to fit on the printing paper, the remainder will be
printed on a second page. In this case, the cut-off point may occur in the
middle of a line.
♦
Automatic reduction may not be possible if the received document is too
large, contains too many fine graphics or images, or is sent at high
resolution. In this case, the remainder of the document will be printed on a
second page.
1
FUNCTION
Press
2
Press
3
Press
4
Press
1
select 100%.
50
to turn on the function, or
to return to the date and time display.
once and
once and 4 times.
once.
to select AUTO, or
twice.
to
2
The display briefly shows
your selection, then:
CALLER-ID
Display:
OPTION SETTING
RECEIVE RATIO
1=AUTO, 2=100%
The display briefly shows
your selection, then:
PRINT CONTRAST