Transaction Report - Sharp UX-P100 Operation Manual

Sharp operation manual fax machine ux-p100
Hide thumbs Also See for UX-P100:
Table of Contents

Advertisement

Printing Lists
Caller-ID List
This list shows information about your 30 most recent calls. (This list is only
available if you are using the Caller ID function.)

Transaction Report

This report is printed out automatically after an operation is completed to
allow you to check the result. Your fax machine is set at the factory to print out
the report only when an error occurs.
The Transaction report cannot be printed on demand.
Headings in Transaction Report
SENDER/
RECEIVER
START
TX/RX TIME
PAGES
NOTE
62
The name or fax number of the other machine involved in the
transaction. If that machine does not have an ID function, the
communication mode will appear (for example, "G3").
The time at which transmission/reception started.
Total time taken for transmission/reception.
Number of pages transmitted/received.
(One of the following notes will appear under NOTE in the
report to indicate whether the transaction was successful,
and if not, the reason for the failure.)
OK - Transmission/reception was successful.
P.FAIL - A power failure prevented the transaction.
JAM - The printing paper or document jammed, preventing
the transaction.
BUSY - The fax was not sent because the line was busy.
COM.E-0 to COM.E-7 - A telephone line error prevented the
transaction. See Line error on page 67.
CANCEL - The transaction was cancelled because the
STOP key was pressed, no document was in the feeder, or

Advertisement

Table of Contents
loading

This manual is also suitable for:

P100 - ux b/w - fax

Table of Contents