Operating With Projector Control - Sanyo PLC WTC500AL Owner's Manual

Basic Operation

Operating with Projector Control

Lens Operation
The following lens operation can be made with the Lens
button on the top control.
Press the Lens button to enter each lens operation mode.
The selected adjustment display appears on the screen.
Zoom ➜ Focus ➜ Lens Shift ➜
Zoom Adjustment
Display "Zoom" on the screen. Use the Point
to zoom in and out the image.
Focus Adjustment
Display "Focus" on the screen. Use the Point
to adjust focus of the image.
Lens Shift Adjustment
Display "Lens shift" on the screen. Use the Point
buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 50 percent, or
sideways up to 15 percent from the central axis of the
lens shift.
✔
Note:
• The arrow disappears at the maximum lens shift
in each direction.
Shutter Function
Shutter function allows you to completely block out light to
the screen. Press the SHUTTER button to close the shutter
inside the projector. To open up the shutter, press the
SHUTTER button again. Refer to p.58 for detail of setting for
the Shutter function.
✔
Note:
•The SHUTTER button on the top control and the
remote control cannot be effective when Shutter
Protection is "On" in the Setting menu. (p.58)
•The SHUTTER indicator on the projector's top lights
blue when the shutter is closed. (p.13)
•The projector will shut down automatically when the
set time on Shutter management has passed. (p.58)
•The Power management function does not work
when the shutter is closed.(pp.56-57)
28
• • • • •
buttons
ed
ed buttons
ed7 8
Top Control
LENS
button
ZOOM
FOCUS
SHUTTER
button
MENU
button
POINT
buttons