Sanyo PLC WTC500AL Owner's Manual page 15

Remote Control
!3
!4
!5
!6
!7
!8
!9
@0
@1
!3 MENU button
Open or close the On-Screen Menu (p.26).
!4 P-TIMER button
Operate the P-timer function (p.31).
!5 D .ZOOM button
Select the Digital zoom +/- mode and resize the
image (pp.30,47).
!6 ZOOM button
Select the Zoom function (p.30).
!7 FOCUS button
Select the Focus function (pp.28,30).
!8 PIP button
– Operate the Picture in Picture function.
– Switch the Picture in Picture to On/Off (pp.31,52).
!9 PIP VOL . button
Select the volume function at PIP mode (p.31).
@0 LASER button
– Operate the Laser pointer function. Laser beam
is emitted while pressing this button for one
minute. When using the laser pointer for more
than one minute, release the LASER button and
press it again (p.32).
– Display the Pointer on the screen (p.32).
@1 MUTE button
Mute the sound (p.29).
@8
@7
@6
@5
@4
@3
@2
Part Names and Functions
@2 R ESET/ON/ALL-OFF switch
When using the remote control, set this switch to
"ON. " Set it to "ALL OFF" for power saving when
it is not in use. Slide this switch to "RESET" to
initialize the remote control code or switch the
Spotlight and Pointer to the Laser pointer function
(p.32).
@3 SHUTTER button
Close the built-in shutter for light blocking.(pp.28,58)
@4 KEySTONE button
Correct keystone distortion (p.31).
@5 LENS SHIFT button
Select the Lens Shift function (p.28).
@6 SCREEN button
Select the screen size (p.30).
@7 R-CLICK button
Act as the right mouse button for wireless mouse
operation (p.33).
@8 SELECT button
– Execute the selected item (p.26).
– Expand or compress the image in the Digital
zoom mode (p.47).
@9 NUMBER buttons
Act as number buttons. Use these buttons when
setting the remote control codes (p.17) or when
entering the PIN code numbers (pp. 24, 49–51,
59-61).
@9
For PIN code
and remote
control code.
15