Operating With Projector Control - Sanyo PLC-XT35 Owner's Manual

Basic Operation
Operating with Projector Control
Lens Operation
The following lens operation can be made with the Lens
button on the top control.
Press the Lens button to enter each lens operation mode.
The selected adjustment display appears on the screen.
Lens Shift Adjustment
Display "Lens shift" on the screen. Use the Point
buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 50 percent, or
sideways up to 15 percent from the central axis of the
lens shift.
✔
Note:
• The arrow disappears at the maximum lens shift
in each direction.
Zoom Adjustment
Display "Zoom" on the screen. Use the Point
to zoom in and out the image.
Focus Adjustment
Display "Focus" on the screen. Use the Point
to adjust focus of the image.
Information
Information display can be used to confirm the current
operating condition of the projector and the signal being
projected through the projector.
Press the INFO. button on the top control or remote control
to display the information window on the screen. To hide
the information window, press the INFO. button again or
Point buttons.
7 8
The information window can also be selected from the
menu.
8
Top Control
LENS
button
ed7 8
ed buttons
buttons
ed
Information Menu
* The H- and V-sync freq. values described in this figure
may be different from the actual values.
INFO .
button
MENU
button
POINT
buttons
ZOOM
FOCUS
Information Menu