Operating With Projector Control - Sanyo PLC-ZM5000 Owner's Manual

Lens Operation
The following lens operation can be made with the LENS
button on the side control.
Press the LENS button to enter each lens operation
mode. The selected adjustment display appears on the
screen.
Zoom Adjustment
Display Zoom
to zoom in and out the image.
Focus Adjustment
Display Focus
to adjust focus of the image.
Lens Shift Adjustment
Display Lens shift
buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 60 percent, or
sideways up to 10 percent from the central axis of the
lens shift.
Press and hold the LENS button for more than 5 seconds
to return to the central position.
Note:
Shutter Function
Shutter function allows you to completely block out light
to the screen. Press the SHUTTER button to close the
shutter inside the projector. To open up the shutter,
press the SHUTTER button again. Refer to p.63 for
details of setting for the Shutter function.
Note:
On

Operating with Projector Control

......
Basic Operation
Side Control
SHUTTER button POINT buttons
Zoom
Focus
Lens shift
LENS button
27