Side Terminal - Sanyo PLC WTC500AL Owner's Manual

Side Terminal

t
y
u
q HDMI TERMINAL
Connect the HDMI signal (including sound signal)
from video equipment or the DVI signal from
computer to this terminal (p.20).
w COMPUTER INPUT TERMINAL (ANALOG)
Connect the computer (or RGB scart) output signal
to this terminal (p.20).
e AUDIO MONITOR OUTPUT jACK (VARIABLE)
This jack outputs the audio signal from computer
or video equipment to external audio equipment
(p.22).
r MONITOR OUTPUT TERMINAL (ANALOG)
This terminal outputs the video signal from
computer to external video equipment (p.21).
t AUDIO 1 jACK
Connect the audio output (stereo) signal from a
computer or video equipment connected to q or
w to this jack (p.22).
Part Names and Functions
q w e r
y AUDIO 2 jACK
Connect the audio output (stereo) signal from a
computer or video equipment connected to i to
this jack (p.22).
u AUDIO 3 jACKS (L(MONO)/R)
Connect the audio output signal from video
equipment connected to o or !2 to these jacks
(p.22). For a mono audio signal (a single audio jack),
connect it to the L (MONO) jack.
i 5 BNC INPUT jACKS
Connect the component or composite video output
signal from video equipment to VIDEO/Y, Cb/Pb,
and Cr/Pr jacks or connect the computer output
signal (5 BNC Type [Green, Blue, Red, Horiz. Sync,
and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.20-
21).
o S-VIDEO INPUT jACK
Connect the S-VIDEO output signal from video
equipment to this jack (p.21).
i
o
11