Screen Adjustment - Sanyo PLC WTC500AL Owner's Manual

Screen Adjustment

1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Screen Menu icon.
2
Use the Point buttons to move the red frame
ed
pointer to the desired function and then press the
SELECT button.
Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point 7 8 buttons to switch between each option.
Store ........ Keep the keystone correction even when the
AC power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT button.
The "Keystone" appears on the screen. Use the Point
7 8 buttons to correct keystone distortion. (p.31)
Ceiling
When this function is set to "On, " the picture is top/bottom
and left/right reversed. This function is used to project the
image from a ceiling-mounted projector.
Rear
When this function is set to "On, " the picture is left/right
reversed. This function is used to project the image from
the rear of the screen.
Screen Adjustment
7 8 buttons to move the red
Screen Menu
Move the red frame pointer
to the desired function and
press the SELECT button.
Keystone
ed
Ceiling
Rear
Screen Menu icon
Use the Point
7 8
buttons to select
Store or Reset.
45