Wireless Mouse Operation - Sanyo PLC WTC500AL Owner's Manual

Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer.
1
Before operating the wireless mouse, connect
your computer and the projector with the
supplied USB cable (p. 20).
When the Pointer function is used, the wireless
mouse is not available.
2
When a USB cable is connected to the
computer and the projector, turn on the
projector first, then the computer. If you turn on
the computer first, the wireless mouse function
may not operate properly.
Basic Operation
PRESENTATION POINTER
button
Move the pointer on the screen
with this button.
R-CLICK button
Act as right (click) mouse
button while the projector and a
computer are connected with a
USB cable.
L-CLICK button
Act as left (click) mouse
button while the projector
and a computer are
connected with a USB
cable.
33