11
Installing the Pivot
Assembly
Parts needed for this procedure:
1
Pivot assembly
1
Hairpin cotter
Procedure
1.
Slide the square end of the pivot assembly
through the opening in the left bagger support
and the post through the right support
24).
Figure 24
1. Pivot assembly
2.
Install the hairpin cotter into the post to secure
the pivot assembly to the bagger support
24).
(Figure
g037900
2. Hairpin cotter
(Figure
12
Installing the Hold-Down
Rod
Parts needed for this procedure:
1
Hold-down rod
1
Hairpin cotter
Procedure
1.
Install hold-down rod to the pivot assembly
(Figure
25).
1. Hold-down rod
2.
Use the hairpin cotter to secure the rod into the
pivot assembly
18
Figure 25
2. Hairpin cotter
(Figure
25).
g037978