Adjusting The Parking Brake; Checking The Tire Pressure - Toro TITAN MAX Operator's Manual

16. Secure the tubes together with the nuts (1/4
inch) as shown in
17. Insert the upper discharge tube through the tube
seal in the hood.
18. Pull the upper tube out slightly so that the seal
extends outward and over the blower assembly
(Figure 31).
19. Use both latches to attach the lower tube to the
blower assembly
Figure 33.
(Figure 30).
18
Adjusting the Parking
Brake
No Parts Required
Procedure
Check to ensure that the parking brake is adjusted
properly. Refer to your Operator's Manual for the
correct procedure.
19

Checking the Tire Pressure

No Parts Required
Procedure
Increase the tire pressure due to the additional weight.
Note:
This is not applicable with semi-pneumatic
tires.
Check and increase the air pressure in the front caster
wheels and rear tires
Air pressure in the rear tires: 138 kPa (20 psi)
Air pressure in the front caster wheels: 172 kPa
(25 psi)
23
(Figure 34).
Figure 34
g001055