Installing The Blower Assembly - Toro TITAN MAX Operator's Manual

6
Installing the Blower
Assembly
Parts needed for this procedure:
1 Blower assembly
Procedure
WARNING
An uncovered discharge opening allows the
lawn mower to throw objects toward you or
bystanders, resulting in serious injury. Also,
contact with the blade could occur.
• Never operate the lawn mower without a
cover plate, a mulch plate, or a grass chute
and catcher.
• Make sure that the grass deflector is
installed when you remove the grass chute
and catcher.
Important:
Install the side-discharge chute when
you remove the bagger and blower.
Important:
Save all the hardware and the
side-discharge chute.
1. If necessary, install the belt onto the blower
pulley (Figure 15).
2. Insert the blower pivot pin into the blower
support and rotate the blower assembly inward
toward the machine
Note:
The blower assembly should
automatically latch as shown in
(Figure 13).
Figure 14.
1. Blower assembly
2. Blower pivot pin
1. Blower latch
13
Figure 13
3. Blower support
Figure 14
g201514
g201893