Installing The Blower Belt And Powered Bagger Cover - Toro TITAN MAX Operator's Manual

7
Installing the Blower Belt
and Powered Bagger Cover
Parts needed for this procedure:
1 Powered bagger cover
1 Blower belt
Procedure
1. Install the belt around the blower pulley
15 and Figure 16); refer to
Assembly (page
Figure 15
Blower Belt Routing
1. Idler/tension pulley
2. Blower pulley
6 Installing the Blower
13).
3. Blower belt
4. Drive pulley
(Figure
1. Blower pulley
2. Blower in position (housing
portion removed for
illustrative purposes)
3. Spring
4. Idler-pulley post
2. Ensure that the belt remains aligned to the
blower pulley while you are installing the blower
assembly.
3. Pull the spring loaded idler pulley away from the
fixed spring post, and route the belt around the
mower deck pulley
Note:
g201516
blower pulley correctly.
4. Route the belt around the drive pulley as
illustrated in
5. Install the powered bagger cover over the belt
cover, and secure it by tightening the knob
(Figure
14
Figure 16
5. Idler arm
6. Drive pulley
7. Idler/tension pulley
8. Blower belt
(Figure 16).
Ensure that the belt is routed around the
Figure 15 and Figure
17).
g201513
16.