Toro TITAN MAX Operator's Manual page 11

2. Remove the existing bolt and nut from the
mower deck (Figure
Figure 9
1. Existing bolt
3. Install the left side of the baffle using a carriage
bolt (5/16 x 3/4 inch) and flange nut (5/16 inch)
as shown in Figure
4. Loosen the 2 carriage bolts (5/16 x 3/4 inch) in
the baffle slots, and slide the baffle until the hole
aligns with the hole in the mower deck
10).
5. Install baffle as shown in
6. Tighten the 2 carriage bolts (5/16 x 3/4 inch) in
the baffle slots (Figure
9).
2. Existing nut
10.
(Figure
Figure 10.
10).
1. Inner baffle
2. Hole for mower deck
installation.
3. Right blade
g337317
4. Outer baffle
11
Figure 10
5. Install this carriage bolt
(5/16 x 3/4 inch) and
flange nut (5/16 inch) after
sliding the baffle.
6. Slots in the baffle
7. Loosen these 2 carriage
bolts (5/16 x 3/4 inch) and
2 flange nut (5/16 inch).
8. Install this carriage bolt
(5/16 x 3/4 inch) and
flange nut (5/16 inch) first.
g337315