Table of Contents
Advertisement
11
Installing the Blower Belt
and Powered Bagger Cover
Parts needed for this procedure:
1
Powered bagger cover
1
Blower belt
Procedure
1.
Install the belt around the blower pulley
25
and
Figure
26); refer to
Blower Assembly (page
Use the following belt based on the mower
deck size:
48-inch Mower
54-inch Mower
Deck
Toro Part No.
Toro Part No.
127-0074
Figure 25
Blower Belt Routing
1. Idler/tension pulley
2. Blower pulley
10 Installing the
14).
60-inch Mower
Deck
Deck
Toro Part No.
127-0075
127-0076
3. Blower belt
4. Drive pulley
(Figure
1. Blower pulley
2. Blower in position (housing
portion removed for
illustrative purposes)
3. Spring
4. Idler-pulley post
2.
Ensure that the belt remains aligned to the
blower pulley while you are installing the blower
assembly.
3.
Pull the spring loaded idler pulley away from the
fixed spring post, and route the belt around the
mower deck pulley
Note:
blower pulley correctly.
4.
Route the belt around the drive pulley as
illustrated in
5.
Install the powered bagger cover over the belt
cover, and secure it by tightening the knob
(Figure
g201516
16
Figure 26
5. Idler arm
6. Drive pulley
7. Idler/tension pulley
8. Blower belt
(Figure
26).
Ensure that the belt is routed around the
Figure 25
and
Figure
27).
g201513
26.
Advertisement
Table of Contents
