Receiving In Tam Mode (Sf-3100T) - Samsung SF-3100 User Manual

Receiving in TAM
Mode (SF-3100T)
If you are an SF-3100T user,
Mode by pressing the Answer button. Once you press
Answer to turn TAM Mode on , the display briefly shows
the time when the greeting message was recorded and
shows countdown as the message is played back. The
machine returns to Standby Mode after playing the
message back. TAM appears in the right hand corner of
the display and the Answer button lights.
You cannot place the machine in TAM Mode until you have
recorded a greeting message. An error message will be
displayed if you attempt to place the machine in TAM Mode
before a message is recorded. To record TAM message, see
"Recordng TAM Message (SF-3100T only)" on page 4-2.
Before the TAM memory becomes full, you will need to
delete the messages that you have already listened to in order
to make more memory available.
When you get a call, the machine answers the call with the
TAM greeting message. The machine records the caller's
message. If a fax tone is sensed, the machine goes into receive
mode. Anytime the greeting message is playing, or an
incoming message is being recorded, you can talk to the other
person by picking up the handset. If the memory becomes full
while recording, your machine beeps a warning and
disconnects the line. The machine will not function as an
answering machine unless you erase the recorded messages.
When you want to talk to a caller with the other telephone on
the same line while recording an incoming message (ICM),
lift its handset and press '* (asterisk)', '# (pound)' and '*
(asterisk)'.
If the Message Paging feature is on, and a new message is
recorded, the machine will dial the specified phone number to
alert you that there is a message recorded in memory. For
more information, see "Message Paging" on page 4-7.
Note
If there's a power failure while recording a caller's message,
it does not record.
The Fax Machine
you can turn on/off the TAM
3-9