Receiving Automatically In Fax Mode; Receiving In Tel/Fax Mode - Samsung SCX-5315F User Manual

3.4
R F
ECEIVING A AX
Receiving Automatically in FAX
Mode
Your machine is preset to FAX mode at the factory. If you have
changed the fax mode, take the following steps to receive faxes
automatically:
1
Press Receive Mode repeatedly until you see "FAX" on the
lower line of the display.
You can also use the navigation keys to select the desired
receive mode after pressing Receive Mode.
2
When the desired mode is displayed, press Mode/Enter to
save the selection.
3
When you receive a call, the machine answers the call on a
specified number of rings and receives a fax automatically.
To change the number of rings, see "System Data Options"
on page 6.6.
To adjust the ringer volume, see "Adjusting the Ringer Volume"
on page 1.11.

Receiving in TEL/FAX Mode

1
Press Receive Mode repeatedly until you see "TEL/FAX" on
the lower line of the display.
You can also use the navigation keys to select the desired
receive mode after pressing Receive Mode.
2
When the desired mode is displayed, press Mode/Enter to
save the selection.
3
When you get a call, the machine answers it.
If a fax is being sent, the machine goes into reception
mode.
If the machine does not detect a fax signal, it will continue
ringing to tell you it is a phone call. If you do not answer the call
by pressing On Hook Dial, it will automatically switch to
reception mode and start to receive any faxes.