Time/Date Setup - Samsung SF-3100 User Manual

Time/Date Setup

The current date and time are shown in the display when the
machine is on and ready for use (Standby Mode). The date
and time will be printed on all faxes you send.
1
Press Setup.
2
Press ➛ ➛ ➛ ➛ or ❿ ❿ ❿ ❿ to choose 'TIME/DATE SETUP'
and press Start/Enter.
3
Press Start/Enter when the display shows 'DATE
FORMAT'.
4
Press ➛ ➛ ➛ ➛ or ❿ ❿ ❿ ❿ to select either 'EUROPE' or 'USA'
and press Start/Enter.
5
Press Start/Enter when the display shows
'TIME/DATE'.
•
If you chose USA format, the date will be displayed as
MM-DD-YYYY HH:MM, for example, 03-20-1999
10:20.
•
If you chose EUROPE format, the date will be dis-
played as DD-MM-YYYY HH:MM, for example, 20-
03-1999 10:20.
6
Set the date and time. You can move the cursor
by pressing ➛ or ❿.
•
If you enter an invalid number, the machine beeps and
doesn't proceed to the next step. If this happens, just
re-enter the correct number.
DD (Day) = 01~31
MM (Month)= 01~12
YYYY (Year) = four digits
HH (Hour) = 00~23
MM (Minute) = 00~59
7
Press Start/Enter when the date and time appear
correctly.
•
The display shows the date and time you have set, then
returns to Standby Mode.
Setup
1-9