Sending A Fax; Loading Document - Samsung SF-3100 User Manual

The Fax Machine
Sending a
Fax
3-2
Sending a fax is very simple if you follow the instructions
starting from here. They will describe how to load the
document, set the resolution/contrast and dial the number.

Loading Document

1
Turn the page face down.
Be sure that your document is dry and free of
staples, paper clips, and other foreign objects. For
more information on what kind of paper you can
use for documents, see "Acceptable Documents
(for ADF)" on page 8-4.
2
Adjust the document guides to match the width
of the document, and load document consisting
of up to 15 sheets until the Automatic Document
Feeder seizes and pulls it in. The display will
indicate 'DOCUMENT READY' when it senses
that a document has been loaded.
•
If you are sending more than one sheet, make sure the
bottom sheet enters first. Insert the sheets with a
slight push to ensure smooth feeding.
•
To add pages while faxing, place them over the top
sheet. If you're loading pages that are unusually thick
or thin, feed one sheet at a time. If the document
doesn't feed correctly, open the Control Panel, remove
the document, and try loading it again.
3
Choose the proper resolution and contrast by
pressing Rcv. Mode/Contrast and Resolution
respectively.
•
The default resolution is STANDARD and contrast is
NORMAL.
•
For a normal document, it is not necessary to change
them.
Skip over this step. For more information on Resolu-
tion and Contrast, see "Setting Document Resolution
and Contrast" on page 3-3.