Call Waiting; Voice Mail; Temporary Tone Dialing - Radio Shack 43-3577 User Manual

Press PAGE again or put the handset back on the telephone base to stop the
paging tone.

Call Waiting

If you subscribe to Call Waiting service from your telephone company, you
will hear a beep if you are on a call when a new call comes in. The Caller ID
information is displayed if you subscribe to the combined Caller ID with Call
Waiting service.
• Press FLASH on the handset to put the current call on hold and answer the
incoming call.
• Press FLASH at anytime to alternate between calls.

Voice Mail

If you subscribe to Voice Mail service from your telephone company, you can
use your cordless telephone to access your voice mailbox.
The VISUAL RINGER LED light on the base of your phone flashes whenever
you have messages waiting in your voice mailbox. You can program your access
number to a memory dial location. (The voice mail service provider will supply
you with the access number. This number may be simply a phone number.
Refer to the provider's literature.)
You may need to occasionally reset the indicator if it remains on after you have
retrieved your messages. To reset the indicator, press and hold PAGE for five
seconds.

Temporary Tone Dialing

If you have pulse (rotary) service, you can change from pulse to touch tone
dialing during a call. This is useful if you need to send touch tone signals for
telephone banking or long distance services.
Once you have initiated your call, press TONE f. All subsequent key presses
are sent as touch tone signals.
After you hang up, the phone returns to pulse (rotary) dialing for the next call.
17