Mounting on a Wall
Mounting on a wall plate:
1. Connect the phone as shown on page 9, except use a short modular cord
(not supplied) to plug into the wall plate.
2. Align the base and the holder's keyhole slots with the wall plate studs and
slide the base downward to secure it.
Mounting directly on a wall:
To mount the phone directly on a wall, you need two screws (not supplied) with
heads that fit into the keyhole slots on the base and the bracket.
1. Drill two holes 3
2. Thread a screw into each hole, letting the heads extend about
(10 mm).
3. Connect the phone as shown on page 9.
4. Align the base and the holder's keyhole slots with the screws and slide the
base downward to secure it.
/
" (3mm)
1
8
3
/
"
15
16
100mm
inches (100 mm) apart.
/
15
16
10
/
inch
1
8
Telephone base
Telephone
Telephone
base
wall jack
adapter