Flash And Call Waiting; Setting Menu Options - Radio Shack 43-164 Manual

Beyond.the.Basics
Page
To locate the handset (while it's off the base), press find hs on
the base. The handset beeps for 60 seconds. Paging is canceled
when pressing find hs on the base or any handset key, or the
handset is returned to the base.
NOTE
Flash.and.Call.Waiting
If you have "Call Waiting" service and a call waiting tone sounds
while you are on a call, press talk/flash to accept the waiting
call. There is a short pause. Then you will hear the new caller. To
return to the original caller, press talk/flash again.
NOTE
Setting.Menu.Options
There are five setup options available. They are Auto Talk, CIDCw
(Caller ID on Call Waiting), Area Code, Dial and Language.
Auto Talk allows you to answer the phone without pressing
talk/flash.
If the phone rings when Auto Talk is On, simply remove the
handset from the cradle and the phone automatically answers
the call. If the phone rings when Auto Talk is Off, you must press
talk/flash to answer the call.
NOTE
UC050ZH_43-164_OM3.indd 21
Paging is also canceled when the phone receives an
incoming call.
You must subscribe through your local telephone
company to receive Call Waiting Service.
The Cordless phone features include Auto Talk and
Auto Standby. Auto Standby allows you to hang
up by simply returning the handset to the cradle.
1
1/9/2007 3:45:47 PM