Memory Dialing; Storing An Entry - Radio Shack 43-3577 User Manual

Memory Dialing

Memory Dialing allows you to dial a number using just a few key presses. You
can store up to ten names and numbers in the handset. Each entry can have of
a number up to 20 digits and a name up to 14 characters.
When entering numbers and characters:
• Press TONE f or g to move the cursor to the left or right.
• Press DEL/CH to erase a number/character.
• Press and hold DEL/CH to delete all characters.
• Press REDIAL to enter a pause in the dialing sequence. The display shows
a . Each pause counts as one digit and represents a two second delay of
P
time between the digit.

Storing an Entry

1. Press MEM,
Select Memory
2. Press RING/VOL +/– or (0–9) to select the memory
location to store the number.
3. Press SELECT.
4. Press SELECT again to edit the memory location.
and a cursor flashes indicating that the
Store Name
display is ready for the name to be entered.
If
Edit Memory X
location is already stored. You can either edit
the entry in this location, delete the entry in this
location, or select
5. Use the number keys to enter the name. See on "Character Chart" on page 19.
6. When finished, press SELECT. The screen displays
.
Store Number
7. Use the number keys to enter the number.
8. Press SELECT. A confirmation tone sounds.
shows on the display.
X Stored
9. Repeat steps 2–6 to store more numbers.
10. Press MEM to return to standby mode.
is displayed.
appears, the selected memory
to choose another location.
Go Back
Memory
18
Select Memory
g
1
2
Store Name
Store Number