Idrac Settings; Device Settings - Dell PowerEdge XR8610t Installation And Service Manual

Table 48. Redundant OS Control details (continued)
Option
Miscellaneous Settings
To view the Miscellaneous Settings screen, power on the system, press F2, and click System Setup Main Menu > System
BIOS > Miscellaneous Settings.
Table 49. Miscellaneous Settings details
Option
System Time
System Date
Time Zone
Daylight Savings Time
Asset Tag
Keyboard NumLock
F1/F2 Prompt on Error
Load Legacy Video Option ROM
Dell Wyse P25/P45 BIOS Access
Power Cycle Request

iDRAC Settings

The iDRAC settings is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable
various iDRAC parameters by using the iDRAC settings.
NOTE: Accessing some of the features on the iDRAC settings needs the iDRAC Enterprise License upgrade.
For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at
www.dell.com/idracmanuals.

Device Settings

Device Settings enables you to configure device parameters such as storage controllers or network cards.
46 Pre-operating system management applications
Description
When set to Enabled, BIOS boots to the device specified in Redundant OS Location.
When set to Disabled, BIOS preserves the current boot list settings. This option is set to
Disabled by default.
Description
Enables you to set the time on the system.
Enables you to set the date on the system.
Enables you to set the time zone on the system.
Enables you to set whether the Daylight Savings Time is enabled or disabled.
Specifies the asset tag and enables you to modify it for security and tracking
purposes.
Enables you to set whether the system boots with the NumLock enabled or
disabled. This option is set to On by default.
NOTE: This option does not apply to 84-key keyboards.
Enables or disables the F1/F2 prompt on error. This option is set to Enabled by
default. The F1/F2 prompt also includes keyboard errors.
Enables you to let the system BIOS determine whether it will load legacy video
(INT 10h) option ROM from the video controller, in UEFI Boot Mode. This option
is set to disabled by default
Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to
Enabled by default.
Enables or disables the Power Cycle Request. This option is set to None by
default.
https://