CHAPTER 3
CONNECTING POWER AND DEVICES
Connecting power
Connect the supplied power cable from the AC
power inlet on the bottom of the interactive flat panel
to a power outlet.
NOTE
Refer to the interactive flat panel's specifications for power requirements and power
consumption information (see Resources for decision makers on page 10).
Connecting a computer to the AM30 appliance
NOTE
For the best experience with SMART kapp iQ Pro, connect the room computer to the AM30
appliance.
Some models of the AM30 appliance have computer
connectors. If you want to use the board's touch
features and use a pen to draw and write, follow these
steps:
1. Connect a computer to the AM30 appliance using
USB and HDMI cables.
2. Download and install SMART Product Drivers and
SMART Ink on your computer. See
smarttech.com/us/Support/
Browse+Support/Download+Software).
After you've connected the room computer to the
AM30 appliance, you can use the Input app
19
smarttech.com/kb/171000
to