Panasonic WJ-HD100 Operating Instructions Manual page 59

3. Specify the start time with the JogDial, LCD button,
• To increase or decrease the parameter, rotate the JogDial clockwise or counter-clockwise. Pressing the LCD button
upward or downward will perform the same operation.
• To move the cursor to the right or left, press the LCD button to the right or left. Pressing the
same operation.
4. Specify the end time as same as the start time.
5. Press the JogDial for 2 seconds to start copying. The LCD dis-
plays status.
Notes:
• There may be cases that a few pictures are copied redundant than specified.
• When an exact starting time is not found among the recorded data, copying will start from the closest time to the specified.
• Time and date specific copy may error when the original data are lined back and forth on the WJ-HD100.
• Time relation should be always kept so that the end time comes after the start time.
Additions to page 40, Copy to CompactFlash Card
Notes on alarm operation during copying
• The recorder stops copying and enters alarm recording when an alarm is activated in the course of copying. We recom-
mend that you set ALARM SUSPEND to ON with the LCD buttons (refer to page 38) when copying is frequently interrupted.
• Even though ALARM SUSPEND is set to OFF there may be cases where the recorder ignores alarm inputs without logging
events while copying.
5
and button.
DISPLAY SELECT
LCD CONTRAST
or button will perform the
START JAN01.01 23:00:00
END JAN02.01 23:10:00
DISPLAY SELECT
LCD CONTRAST