Alarm Operation - Panasonic WJ-HD100 Operating Instructions Manual

Alarm Operation

Suspending Alarm Input
Suspending the alarm function may be convenient during setup procedures or when alarm recording is not needed. In ON
position, any alarm input is ignored and the recorder performs as follows:
• The alarm event will be logged in the alarm history.
• The recorder does not enter alarm recording.
• The alarm buzzer does not sound.
• The ALARM SUSPEND indicator lights.
1. Press the LCD button downward to display [Alarm Suspend] on the LCD.
2. Select either ON or OFF by
pressing the LCD button to
the right or left.
ON: Alarm input is suspend-
ed.
OFF: Suspension is reset.
Alarm History Search
The alarm history is listed on the monitor in chronological
order with event number, date, time, availability of recorded
picture, and the activation source.
ALARM RECALL 1 OF 10
NO DATE
99 JUN 9.00 00:00:00 * T
98 JUN 1.00 02:34:56
97 JUN 1.00 01:10:01 * V
96 MAY31.00 23:34:45
95 MAY30.00 02:00:20 * T
94 MAY14.00 05:30:31 * T
93 MAY 7.00 23:00:59
92 MAY 6.00 22:05:50
91 APR14.00 23:00:59 * T
90 APR14.00 16:06:34 * V
ALARM RECALL 10 OF 10
NO DATE
4 FEB20.00 00:00:00 * T
3 FEB11.00 02:34:56
2 JAN15.00 01:10:01 * V
1 JAN 1.00 23:34:45
PUSH JOG
T: Alarm terminal was activated
V: VMD was activated
Asterisk *: Corresponding alarm picture is recorded on
the disk
No asterisk: No picture is available.
38
TIMER HDD
ALARM
FULL
OPERATE SUSPEND
DAYLIGHT
SAVINGS LOCK
Lights while alarm is suspended.
TIME ALM
T
V
T
V
TIME ALM
T
V
DATA CLEAR
1
MEMORY CARD
DISPLAY SELECT
LCD CONTRAST
• To browse through the history
1. Hold down the LCD button center for 2 seconds.
The monitor displays the ALARM RECALL list. The
line highlighted on the monitor is also displayed on
the LCD.
2. Rotate the JogDial to scroll up or down the list.
3. Hold down the LCD button center for 2 seconds to
go back to the previous status.
• To search for playback
1. Select the desired alarm event by rotating the
JogDial.
2. Press the [B PLAY] button to play back the record-
ed picture. The LED lights. The ALARM RECALL list
disappears.
3. Press the [ STOP] button to stop playback.
The ALARM RECALL List appears on the monitor.
4. Hold down the LCD button center for 2 seconds to
quit alarm history search.
• To erase the stored history
1. Move the cursor to "PUSH JOG DATA CLEAR",
then press the JogDial.
All alarm event records on the list are erased.
Note: You can access the pictures recorded on the
disk by time & date search after the erasure.
Note: In some cases the log displayed in the ALARM
RECALL list may apply to the previous alarm record
that was overwritten after selecting CONTINUE for the
DISK END MODE. This is because the alarm history is
updated later than the image data.
(downward)
SETU/ESC PUSH– PAUSE
DISPLAY SELECT /
STOP PLAY REC
PLAY MODE SELECT
ALARM SEARCH STEP REW/FF
LCD CONTRAST
/ /
Digital Disk Recorder WJ-HD
2
(right or left)
SET
/