Setup Procedures; Prior To Setup - Panasonic WJ-HD100 Operating Instructions Manual

SETUP PROCEDURES

Prior to Setup

Turning On the Power
POWER
ON
SIGNAL GND
OFF
1. Plug the power cord into the AC outlet.
2. Turn on the power switch on the rear panel.
The operate LED lights, and the date, time and operat-
ing status are displayed on the LCD.
Power-on recording will start if [Timer Rec] has been set to
[EXT] with the LCD button.
Note: Avoid turning the power on and off within a short
time. Allow at least 5 seconds from off to on and
vice versa.
15
TIMER
ALARM
OPERATE SUSPEND
DAYLIGHT
SAVINGS
DISPLAY SELECT
LCD CONTRAST
Turning Off the Power
SETUP/ESC
DISPLAY SELECT
STOP PLAY
PLAY MODE SELECT
ALARM SEARCH STEP
LCD CONTRAST
/
Digital Disk Recorder WJ-HD
OPERATE
POWER
ON
OFF
1. Press the stop button to quit recording or playback.
Make certain that the HDD access lamp turns off.
2. Turn off the power switch on the rear panel.
The operate LED goes out, and the operating status
on the LCD disappears.
Note:
• Do not turn off the power while the HDD access
lamp is on.
• Do not leave the unit turned off for a long time.
Supply AC power to the unit and turn it on to charge
up the backup battery.
PUSH– PAUSE SET
/
REC /
REW/FF
/
TIMER HDD
Confirm that
ALARM
FULL the HDD access
SUSPEND
DAYLIGHT
indicator is off.
LOCK
SAVINGS
SIGNAL GND