Adjusting The Headlight Beams - Yamaha VENTURE PZ5NXJ Owner's Manual

PZ5NX
1. Headlight coupler
2. Bulb holder cover
PZ5NT
1. Headlight coupler
2. Bulb holder cover
4. Unhook the bulb holder, and then re-
move the burnt-out bulb.
1. Bulb holder
5. Install a new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
Periodic maintenance and adjustment
its life and illumination will be affect-
ed. If the glass is oil stained, thorough-
ly clean it with a cloth moistened with
alcohol or lacquer thinner.
1
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
6. Install the bulb holder cover, and then
connect the headlight coupler.
7. Install the top cover (PZ5NX) or close the
shroud (PZ5NT).
ESU12281

Adjusting the headlight beams

Turn the headlight beam adjusting screws in
or out to adjust the headlight beams. The
headlight beams move as follows depending
on the turning direction of the headlight beam
adjusting screws.
 Direction (a): Down and to the left
 Direction (b): Up and to the right
 Direction (c): Down and to the right
 Direction (d): Up and to the left
[ECS00622]
69