Table of Contents
Advertisement
Periodic maintenance and adjustment
1. Drive track deflection
2. Slide runner
Standard drive track deflection:
30.0–35.0 mm (1.18–1.38 in)
3.
If the deflection is incorrect, adjust the
drive track.
Adjusting the drive track alignment and de-
flection
1.
Loosen the rear axle nut.
1. Rear axle nut
2.
Lift the rear of the snowmobile onto a
suitable stand to raise the drive track off
the ground.
3.
Start the engine and rotate the drive
track one or two turns. Stop the engine.
4.
Align the drive track by turning the left
and right adjusting nuts.
66
Drive track
2
alignment
Left adjusting
nut
Right adjust-
ing nut
1. Left adjusting nut
2. Right adjusting nut
Shifted to right
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
Shifted to
Shifted to left
right
Turn out
Turn in
Turn in
Turn out
Advertisement
Table of Contents
