Adjusting The Headlight Beam; Fittings And Fasteners; Battery - Yamaha RS Venture RST90Y Owner's Manual

Periodic maintenance and adjustment
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
7. Install the bulb holder cover, and then
connect the headlight coupler.
8. Close the shroud.
ESU12262

Adjusting the headlight beam

1. Open the shroud.
2. Insert a Phillips screwdriver into the hole
under the shroud to turn the headlight
beam adjusting screw.
1. Headlight beam adjusting screw
62
1. Phillips screwdriver
3. To lower the headlight beam, turn the
Phillips screwdriver in direction (a). To
raise the headlight beam, turn the Phillips
screwdriver in direction (b).
4. Close the shroud.
ESU12290

Fittings and fasteners

Check the tightness of the fittings and fasten-
ers.
Tighten in proper sequence and torque if nec-
essary.
ESU12303

Battery

This model is equipped with a VRLA (Valve
Regulated Lead Acid) battery. There is no
need to check the electrolyte or to add distilled
water. However, the battery lead connections
need to be checked and, if necessary, tight-
ened.
EWS00540
WARNING
Battery electrolyte is poisonous and dan-
gerous. It contains sulfuric acid and can
cause severe burns. Avoid contact with
skin, eyes, or clothing.
ANTIDOTE:
EXTERNAL: Flush with water.
G
INTERNAL: Drink large quantities of wa-
G
ter or milk. Follow with milk of magne-
sia, beaten egg, or vegetable oil. Call
physician immediately.