Navigating To A Location; Navigating Back To Start - Garmin EDGE 1040 Owner's Manual

Navigating to a Location

1 Select Navigation.
2 Select an option:
• Select MTB Trail Navigation to navigate to a mountain bike trail network.
• Select Browse Map to navigate to a location on the map.
• Select Search to navigate to a point of interest, city, address, intersection, or known coordinates.
• Select Saved Locations to navigate to a saved location.
TIP: You can select
• Select Recent Finds to navigate to one of the last 50 locations you have found.
• Select > Searching near: to narrow your search area.
3 Select a location.
4 Select Ride.
5 Follow the on-screen instructions to your destination.

Navigating Back to Start

At any point during your ride, you can return to the starting point.
1 Go for a ride.
2 At any time, swipe down from the top of the screen, and on the controls widget, select Back to Start.
3 Select Along Same Route or Most Direct Route.
4 Select Ride.
The device navigates you back to the starting point of your ride.
32
to enter specific search information.
Navigation