Transferring Files To Your Device; Deleting Files; Disconnecting The Usb Cable; Navigation - Garmin Edge 810 Owner's Manual

Transferring Files to Your Device

1
Connect the device to your computer
Your device and memory card (optional) appear as
removable drives in My Computer on Windows computers
and as mounted volumes on Mac computers.
NOTE: Some computers with multiple network drives cannot
display device drives. See your operating system help file to
learn how to map the drive.
2 On your computer, open the file browser.
3
Select a file.
4
Select Edit > Copy.
5
Open the Garmin or memory card drive or volume.
6
Select Edit > Paste.
The file appears in the list of files in the device memory or on
the memory card.

Deleting Files

If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1
Open the Garmin drive or volume.
2
If necessary, open a folder or volume.
3
Select a file.
4 Press the Delete key on your keyboard.

Disconnecting the USB Cable

If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not
necessary to safely disconnect.
1
Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2
Disconnect the cable from your computer.

Navigation

This section describes navigation features and settings.
Navigation settings also apply to navigating courses
• Locations and finding places
• Route settings (page 10)
• Optional maps (page 10)
• Map settings (page 10)

Locations

You can record and store locations in the device.

Saving Your Location

You can save your present location, such as your home or
parking spot.
From the home screen, select
Location > .

Saving Locations from the Map

1
From the home screen, select
2
Browse the map for the location.
3
Select the location on the map.
Location information appears at the top of the map.
4
Select the information bar at the top of the screen.
Navigation
(page 8).
NOTICE
(page
(page 9)
> System > GPS > Mark
> .
5 Select > to save the location.

Navigating to a Location

1
From the home screen, select
2
Select an option:
• Select Locations to navigate to a saved location.
• Select Recent Finds to navigate to one of the last 50
locations you have found.
• Select Coordinates to navigate to known coordinates.
• Select All POIs (requires routable maps) to navigate to a
point of interest.
• Select Addresses (requires routable maps) to navigate to
a specific address.
• Select Intersections to navigate to the intersection of two
streets.
• Select Cities to navigate to a city.
• Select to narrow your search.
3
If necessary, select
(optional for locations, POIs, and cities only).
4
Select a location.
5 Select RIDE.
6
Follow the on-screen instructions to your destination.

Navigating to Known Coordinates

1
From the home screen, select
2 Enter the coordinates, and select
3
Follow the on-screen directions to your destination.

Navigating Back to Start

4).
At any point during your ride, you can return to the starting
point.
1
Go for a ride (page
2
During your ride, tap the screen to view the timer overlay.
3 Select > Back to Start > RIDE.
The device navigates you back to the starting point of your
ride.

Stopping Navigation

1
Tap the screen to view the timer overlay.
2
Select > Where To > Stop Navigation.

Projecting a Location

You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
From the home screen, select
2
Select a location.
3
Select the information bar at the top of the screen.
4
Select > Project Waypoint.
5 Enter the bearing and distance to the projected location.
> .
to enter specific search information
> > Coordinates.
.
3).
> > Locations.
9