Updating Your Activity Profile - Garmin EDGE 1040 Owner's Manual

Updating Your Activity Profile

You can customize ten activity profiles. You can customize your settings and data fields for a particular activity
or trip.
TIP: You can also customize the activity profiles from the device settings in the Garmin Connect app.
1 Select > Activity Profiles.
2 Select an option:
• Select a profile.
• Select Create New to add or copy a profile.
3 If necessary, select
TIP: After a ride that is not typical, you can manually update the ride type. Accurate ride type data is
important for creating bike friendly courses.
4 Select an option:
• Select Data Screens to customize the data screens and data fields
• Select Segments to turn on your enabled segments
• Select Climbs > ClimbPro to enable the ClimbPro feature
• Select Climbs > Climb Detection to customize which types of climbs the device detects.
• Select Alerts and Prompts to customize your training alerts
• Select Alerts and Prompts > Sharp Bend Warnings to enable navigation warning messages for difficult
turns.
• Select Alerts and Prompts > Workout Target Alerts to enable workout target alerts.
• Select Alerts and Prompts > Lap to set how laps are triggered
• Select Timer > Auto Pause to change when the activity timer automatically pauses
page 64).
• Select Timer > Timer Start Mode to customize how the device detects the start of a ride and
automatically starts the activity timer
• Select Nutrition/Hydration to enable food and drink consumption tracking.
• Select Self Evaluation to enable self evaluation after workouts or all activities.
• Select MTB/CX > Grit/Flow/Jump Recording to enable grit, flow, and jump recording.
• Select Navigation > Map to customize the map settings
• Select Navigation > Routing to customize the routing settings
• Select Navigation > Navigation Prompts to show navigation messages using a map view or text prompt.
• Select Satellite Systems to turn off GPS
(Changing the Satellite Setting, page
• Select Auto Sleep to automatically enter sleep mode after five minutes of inactivity
page 64).
All changes are saved to the activity profile.
60
to edit the name, color, and default ride type for the profile.
(Starting the Timer Automatically, page
(Training Indoors, page
65).
(Adding a Data Screen, page
(Enabling Segments, page
(Using ClimbPro, page
(Alerts, page 61).
(Marking Laps by Position, page
(Map Settings, page
(Route Settings, page
14) or change the satellite setting
61).
12).
37).
63).
(Using Auto Pause,
64).
38).
39).
(Using Auto Sleep,
Customizing Your Device